Jiangsu Jingtai Glass Co., Ltd

Model Number: JTTG1501356 Brand Name: Jingtai Key Specifications/Special Features: Toughened or tempered glass:Tempered glass refers to a type of security glass commonly used in places and equipment where a standard glass poses dangerGlass is about five times more robust compared to normal glassIn addition to that, on falling it does not break into shardsCrafted using a long process involving heating and fast cooling that makes it stronger than the standard glass

Features of tempered glass:

• Strength:tempered glass has about five times more strength than the normal glass with similar thickness and size
• Has a tensile strength of 65MPa, a bending strength that ranges from 120-200N/mm²and a surface compression more than 95MPa
• Excellentthermalstrength:tempered glass has a much better thermal strength than that of standard glass that enables it to bear temperature changes of around 250°C
• Safety: known as safety glass, as it is extremely hard to break tempered glass and in case it does break, it breaks up into safe globules rather than shards
• Resistance andprocessing: resistance to any surface damage is similar to that of annealed glass
• Extremely robust, it is nearly impossible to cut or alter clear tempered glass
• Breakage pattern: breakage pattern of tempered glass is different
• Part of tempered glass somehow fails, the whole panel will shatter at once
• Tempered glass often fails quite later after the certain event that resulted in the failure took place
• Once a part fails, it triggers stress that begins traveling to the entire board and breaks it up

Use of tempered glass:

• Toughened glass is used when strength, thermal resistance, and safety are important considerations
• Windows (large window andsliding window)
• Doors (sliding doors)
• Platform awning
• Transparent roof
• Fire department access panels
• Stairways and hand-rails
• Office partition or room dividers
• Reflection glass curtain wall

Thickness: 3-19cm

Sizes: 2440 * 4000 meters (96 * 157"),2850 * 5000 meters (112 * 196")

Quality standards:

• GB: Chinese standard
• CE/EN 12150, Euro standard
• ANSi, US standard
• AS/NZS 2208, Australia standard